omni conect ant linux

[Guest]

Prieš keles dienas užsisakiau sau omnitel internetą namams. Komplekte gavau T-modemUSB(TMU-104) modemą su išorine antena. Nezinau kaip suinstaliuoti modemą ant linux. Naudoju Suse 9.2. Pagelbėkit jeigu galite.

[jeegiz]

Panašu kad čia lietuviškas modemas http://www.teltonika.lt/lt/pages/view/?id=42

Kas atsiranda /var/log/messages faile įkišus į USB lizdą modemą?

[Guest]

Labai jau daug tame faile:

Dec 26 21:17:52 linux syslogd 1.4.1: restart.
Dec 26 21:17:57 linux kernel: klogd 1.4.1, log source = /proc/kmsg started.
Dec 26 21:17:57 linux kernel: parport0: PC-style at 0x378 [PCSPP,EPP]
Dec 26 21:17:57 linux kernel: parport_pc: Via 686A parallel port: io=0x378
Dec 26 21:17:57 linux kernel: 8139too Fast Ethernet driver 0.9.27
Dec 26 21:17:57 linux kernel: PCI: Found IRQ 12 for device 0000:00:0a.0
Dec 26 21:17:57 linux kernel: PCI: Sharing IRQ 12 with 0000:00:07.3
Dec 26 21:17:57 linux kernel: PCI: Sharing IRQ 12 with 0000:00:07.2
Dec 26 21:17:57 linux kernel: eth0: RealTek RTL8139 at 0xd0624f00, 00:e0:06:f6:51:e3, IRQ 12
Dec 26 21:17:57 linux kernel: eth0:  Identified 8139 chip type 'RTL-8100'
Dec 26 21:17:57 linux kernel: Linux agpgart interface v0.100 (c) Dave Jones
Dec 26 21:17:57 linux kernel: agpgart: Detected VIA KLE133 chipset
Dec 26 21:17:57 linux kernel: agpgart: Maximum main memory to use for agp memory: 196M
Dec 26 21:17:57 linux kernel: agpgart: AGP aperture is 64M @ 0xe0000000
Dec 26 21:17:57 linux kernel: USB Universal Host Controller Interface driver v2.2
Dec 26 21:17:57 linux kernel: PCI: Found IRQ 12 for device 0000:00:07.2
Dec 26 21:17:57 linux kernel: PCI: Sharing IRQ 12 with 0000:00:07.3
Dec 26 21:17:57 linux kernel: PCI: Sharing IRQ 12 with 0000:00:0a.0
Dec 26 21:17:57 linux kernel: uhci_hcd 0000:00:07.2: UHCI Host Controller
Dec 26 21:17:57 linux kernel: uhci_hcd 0000:00:07.2: irq 12, io base 0000cc00
Dec 26 21:17:57 linux kernel: uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
Dec 26 21:17:57 linux kernel: usb usb1: Product: UHCI Host Controller
Dec 26 21:17:57 linux kernel: usb usb1: Manufacturer: Linux 2.6.8-24-default uhci_hcd
Dec 26 21:17:57 linux kernel: usb usb1: SerialNumber: 0000:00:07.2
Dec 26 21:17:57 linux kernel: hub 1-0:1.0: USB hub found
Dec 26 21:17:57 linux kernel: hub 1-0:1.0: 2 ports detected
Dec 26 21:17:57 linux kernel: PCI: Found IRQ 12 for device 0000:00:07.3
Dec 26 21:17:57 linux kernel: PCI: Sharing IRQ 12 with 0000:00:07.2
Dec 26 21:17:57 linux kernel: PCI: Sharing IRQ 12 with 0000:00:0a.0
Dec 26 21:17:57 linux kernel: uhci_hcd 0000:00:07.3: UHCI Host Controller
Dec 26 21:17:57 linux kernel: uhci_hcd 0000:00:07.3: irq 12, io base 0000d000
Dec 26 21:17:57 linux kernel: uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
Dec 26 21:17:57 linux kernel: usb usb2: Product: UHCI Host Controller
Dec 26 21:17:57 linux kernel: usb usb2: Manufacturer: Linux 2.6.8-24-default uhci_hcd
Dec 26 21:17:57 linux kernel: usb usb2: SerialNumber: 0000:00:07.3
Dec 26 21:17:57 linux kernel: hub 2-0:1.0: USB hub found
Dec 26 21:17:57 linux kernel: hub 2-0:1.0: 2 ports detected
Dec 26 21:17:57 linux kernel: usb 1-1: new full speed USB device using address 2
Dec 26 21:17:57 linux kernel: usb 1-1: Product: T-ModemUSB
Dec 26 21:17:57 linux kernel: usb 1-1: Manufacturer: Teltonika
Dec 26 21:17:57 linux kernel: usb 1-1: SerialNumber: FTNJ58SN
Dec 26 21:17:57 linux kernel: usb 1-2: new low speed USB device using address 3
Dec 26 21:17:57 linux kernel: usb 1-2: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
Dec 26 21:17:57 linux kernel: usb 1-2: Manufacturer: Microsoft
Dec 26 21:17:57 linux kernel: usb 2-1: new full speed USB device using address 2
Dec 26 21:17:57 linux kernel: usb 2-1: Product: deskjet 3320
Dec 26 21:17:57 linux kernel: usb 2-1: Manufacturer: hp
Dec 26 21:17:57 linux kernel: usb 2-1: SerialNumber: TH2B6231DW4I
Dec 26 21:17:57 linux kernel: hdc: ATAPI 126X DVD-ROM CD-R/RW drive, 2048kB Cache
Dec 26 21:17:57 linux kernel: Uniform CD-ROM driver Revision: 3.20
Dec 26 21:17:57 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
Dec 26 21:17:57 linux kernel: usbcore: registered new driver usbserial_generic
Dec 26 21:17:57 linux kernel: usbcore: registered new driver usbserial
Dec 26 21:17:57 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
Dec 26 21:17:57 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI SIO
Dec 26 21:17:57 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI 8U232AM Compatible
Dec 26 21:17:57 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI FT232BM Compatible
Dec 26 21:17:57 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI FT2232C Compatible
Dec 26 21:17:57 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for USB-UIRT Infrared Tranceiver
Dec 26 21:17:57 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Home-Electronics TIRA-1 IR Transceiver
Dec 26 21:17:57 linux kernel: ftdi_sio 1-1:1.0: FTDI FT232BM Compatible converter detected
Dec 26 21:17:57 linux kernel: usb 1-1: FTDI FT232BM Compatible converter now attached to ttyUSB0
Dec 26 21:17:57 linux kernel: usbcore: registered new driver ftdi_sio
Dec 26 21:17:57 linux kernel: drivers/usb/serial/ftdi_sio.c: v1.4.1:USB FTDI Serial Converters Driver
Dec 26 21:17:57 linux kernel: SCSI subsystem initialized
Dec 26 21:17:57 linux kernel: usbcore: registered new driver hiddev
Dec 26 21:17:57 linux kernel: input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:07.2-2
Dec 26 21:17:57 linux kernel: usbcore: registered new driver usbhid
Dec 26 21:17:57 linux kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Dec 26 21:17:57 linux kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7004
Dec 26 21:17:57 linux kernel: usbcore: registered new driver usblp
Dec 26 21:17:57 linux kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Dec 26 21:17:57 linux kernel: st: Version 20040403, fixed bufsize 32768, s/g segs 256
Dec 26 21:17:57 linux kernel: evdev_connect: evdev c1238780 handle c123879c name event0
Dec 26 21:17:57 linux kernel: evdev_connect: evdev c1238680 handle c123869c name event1
Dec 26 21:17:57 linux kernel: evdev_connect: evdev c1238580 handle c123859c name event2
Dec 26 21:17:57 linux kernel: BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Dec 26 21:18:05 linux kernel: NET: Registered protocol family 10
Dec 26 21:18:05 linux kernel: Disabled Privacy Extensions on device c037f6a0(lo)
Dec 26 21:18:05 linux kernel: IPv6 over IPv4 tunneling driver
Dec 26 21:18:15 linux kernel: Disabled Privacy Extensions on device c860c800(sit0)
Dec 26 19:18:47 linux kernel: eth0: link down
Dec 26 19:18:57 linux kernel: eth0: no IPv6 routers present
Dec 26 19:19:31 linux kernel: NET: Registered protocol family 17
Dec 26 19:20:33 linux ifdown: No configuration found for eth0
Dec 26 19:20:33 linux ifdown: Nevertheless the interface will be shut down.
Dec 26 19:20:35 linux kernel: ip6_tables: (C) 2000-2002 Netfilter core team
Dec 26 19:20:35 linux kernel: ip_tables: (C) 2000-2002 Netfilter core team
Dec 26 19:20:35 linux modprobe: WARNING: Error inserting ipfwadm (/lib/modules/2.6.8-24-default/kernel/net/ipv4/netfilter/ipfwadm.ko): Device or resource busy
Dec 26 19:20:35 linux kernel: ip_conntrack version 2.1 (1983 buckets, 15864 max) - 336 bytes per conntrack
Dec 26 19:20:35 linux SuSEfirewall2: Firewall rules unloaded.
Dec 26 19:20:36 linux kernel: eth0: link down
Dec 26 19:20:45 linux SuSEfirewall2: Firewall rules unloaded.
Dec 26 19:20:47 linux kernel: eth0: no IPv6 routers present
Dec 26 19:20:51 linux logger: BEGIN OF YAST2 INTERNET TEST
Dec 26 19:20:55 linux logger: END OF YAST2 INTERNET TEST
Dec 26 19:22:56 linux init: Re-reading inittab
Dec 26 19:23:28 linux kernel: parport0: PC-style at 0x378 [PCSPP,EPP]
Dec 26 19:23:28 linux kernel: lp0: using parport0 (polling).
Dec 26 19:23:29 linux kernel: parport0: PC-style at 0x378 [PCSPP,EPP]
Dec 26 19:23:29 linux kernel: parport_pc: Via 686A parallel port: io=0x378
Dec 26 19:23:29 linux kernel: lp0: using parport0 (polling).
Dec 26 19:23:49 linux hcid[7304]: Bluetooth HCI daemon
Dec 26 19:23:49 linux kernel: Bluetooth: Core ver 2.6
Dec 26 19:23:49 linux kernel: NET: Registered protocol family 31
Dec 26 19:23:49 linux kernel: Bluetooth: HCI device and connection manager initialized
Dec 26 19:23:49 linux kernel: Bluetooth: HCI socket layer initialized
Dec 26 19:23:49 linux kernel: Bluetooth: L2CAP ver 2.4
Dec 26 19:23:49 linux kernel: Bluetooth: L2CAP socket layer initialized
Dec 26 19:23:49 linux sdpd[7308]: Bluetooth SDP daemon
Dec 26 19:23:49 linux kernel: Bluetooth: HIDP (Human Interface Emulation) ver 1.0
Dec 26 19:23:49 linux kernel: Bluetooth: RFCOMM ver 1.3
Dec 26 19:23:49 linux kernel: Bluetooth: RFCOMM socket layer initialized
Dec 26 19:23:49 linux kernel: Bluetooth: RFCOMM TTY layer initialized
Dec 26 19:23:49 linux hidd[7313]: Bluetooth HID daemon
Dec 26 19:23:49 linux hidd[7313]: Exit
Dec 26 19:23:49 linux sdpd[7308]: terminating...  
Dec 26 19:23:49 linux hcid[7304]: Exit.
Dec 26 19:24:57 linux SuSEfirewall2: Firewall rules unloaded.
Dec 26 19:25:09 linux kernel: PCI: Found IRQ 10 for device 0000:00:07.5
Dec 26 19:25:09 linux kernel: PCI: Setting latency timer of device 0000:00:07.5 to 64
Dec 26 19:25:16 linux kernel: apm: set display: No APM present
Dec 26 19:25:17 linux init: Entering runlevel: 5
Dec 26 19:25:17 linux kernel: bootsplash: status on console 0 changed to on
Dec 26 19:25:39 linux kernel: Kernel logging (proc) stopped.
Dec 26 19:25:39 linux kernel: Kernel log daemon terminating.
Dec 26 19:25:41 linux exiting on signal 15
Dec 26 19:25:41 linux syslogd 1.4.1: restart.
Dec 26 19:25:43 linux sshd[8902]: Server listening on :: port 22.
Dec 26 19:25:45 linux rcpowersaved: CPU frequency scaling is not supported by your processor.
Dec 26 19:25:45 linux rcpowersaved: enter 'POWERSAVE_CPUFREQD_MODULE=off' in /etc/sysconfig/powersave/cpufreq to avoid this warning.
Dec 26 19:25:46 linux kernel: klogd 1.4.1, log source = /proc/kmsg started.
Dec 26 19:25:46 linux kernel: powernow-k8: Processor cpuid 631 not supported
Dec 26 19:25:46 linux kernel: powernow: No powernow capabilities detected
Dec 26 19:25:50 linux kernel: Non-volatile memory driver v1.2
Dec 26 19:25:50 linux kernel: end_request: I/O error, dev fd0, sector 0
Dec 26 19:25:50 linux kernel: end_request: I/O error, dev fd0, sector 0
Dec 26 19:25:50 linux kdm: :0[8987]: pam_unix2: session started for user pawel, service xdm-np
Dec 26 19:25:55 linux /usr/sbin/cron[9279]: (CRON) STARTUP (V5.0)
Dec 26 19:26:37 linux kernel: ISO 9660 Extensions: Microsoft Joliet Level 3
Dec 26 19:26:37 linux kernel: ISO 9660 Extensions: RRIP_1991A
Dec 26 19:30:33 linux su: (to root) pawel on /dev/pts/2
Dec 26 19:30:33 linux su: pam_unix2: session started for user root, service su
Dec 26 19:30:33 linux su: pam_unix2: session finished for user root, service su
Dec 26 19:30:33 linux su: (to root) pawel on /dev/pts/2
Dec 26 19:30:33 linux su: pam_unix2: session started for user root, service su
Dec 26 19:31:01 linux su: pam_unix2: session finished for user root, service su
Dec 26 19:31:14 linux su: FAILED SU (to root) pawel on /dev/pts/3
Dec 26 19:31:25 linux su: (to root) pawel on /dev/pts/3
Dec 26 19:31:25 linux su: pam_unix2: session started for user root, service su
Dec 26 19:31:25 linux su: pam_unix2: session finished for user root, service su
Dec 26 19:31:25 linux su: (to root) pawel on /dev/pts/3
Dec 26 19:31:25 linux su: pam_unix2: session started for user root, service su
Dec 26 19:31:41 linux su: pam_unix2: session finished for user root, service su
Dec 26 19:32:15 linux kdm: :0[8987]: pam_unix2: session finished for user pawel, service xdm-np
Dec 26 19:32:15 linux kernel: apm: set display: No APM present
Dec 26 19:32:15 linux init: Switching to runlevel: 6
Dec 26 19:32:16 linux kernel: bootsplash: status on console 0 changed to on
Dec 26 19:32:16 linux kernel: bootsplash: status on console 0 changed to on
Dec 26 19:32:17 linux sshd[8902]: Received signal 15; terminating.
Dec 26 19:32:19 linux kernel: Kernel logging (proc) stopped.
Dec 26 19:32:19 linux kernel: Kernel log daemon terminating.
Dec 26 19:32:20 linux exiting on signal 15
Dec 27 17:57:23 linux syslogd 1.4.1: restart.
Dec 27 17:57:25 linux sshd[3937]: Server listening on :: port 22.
Dec 27 17:57:27 linux rcpowersaved: CPU frequency scaling is not supported by your processor.
Dec 27 17:57:27 linux rcpowersaved: enter 'POWERSAVE_CPUFREQD_MODULE=off' in /etc/sysconfig/powersave/cpufreq to avoid this warning.
Dec 27 17:57:28 linux kernel: klogd 1.4.1, log source = /proc/kmsg started.
Dec 27 17:57:28 linux kernel: parport0: PC-style at 0x378 [PCSPP,EPP]
Dec 27 17:57:28 linux kernel: parport_pc: Via 686A parallel port: io=0x378
Dec 27 17:57:28 linux kernel: Linux agpgart interface v0.100 (c) Dave Jones
Dec 27 17:57:28 linux kernel: agpgart: Detected VIA KLE133 chipset
Dec 27 17:57:28 linux kernel: agpgart: Maximum main memory to use for agp memory: 196M
Dec 27 17:57:28 linux kernel: agpgart: AGP aperture is 64M @ 0xe0000000
Dec 27 17:57:28 linux kernel: USB Universal Host Controller Interface driver v2.2
Dec 27 17:57:28 linux kernel: PCI: Found IRQ 12 for device 0000:00:07.2
Dec 27 17:57:28 linux kernel: PCI: Sharing IRQ 12 with 0000:00:07.3
Dec 27 17:57:28 linux kernel: PCI: Sharing IRQ 12 with 0000:00:0a.0
Dec 27 17:57:28 linux kernel: uhci_hcd 0000:00:07.2: UHCI Host Controller
Dec 27 17:57:28 linux kernel: uhci_hcd 0000:00:07.2: irq 12, io base 0000cc00
Dec 27 17:57:28 linux kernel: uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
Dec 27 17:57:28 linux kernel: usb usb1: Product: UHCI Host Controller
Dec 27 17:57:28 linux kernel: usb usb1: Manufacturer: Linux 2.6.8-24-default uhci_hcd
Dec 27 17:57:28 linux kernel: usb usb1: SerialNumber: 0000:00:07.2
Dec 27 17:57:28 linux kernel: hub 1-0:1.0: USB hub found
Dec 27 17:57:28 linux kernel: hub 1-0:1.0: 2 ports detected
Dec 27 17:57:28 linux kernel: PCI: Found IRQ 12 for device 0000:00:07.3
Dec 27 17:57:28 linux kernel: PCI: Sharing IRQ 12 with 0000:00:07.2
Dec 27 17:57:28 linux kernel: PCI: Sharing IRQ 12 with 0000:00:0a.0
Dec 27 17:57:28 linux kernel: uhci_hcd 0000:00:07.3: UHCI Host Controller
Dec 27 17:57:28 linux kernel: uhci_hcd 0000:00:07.3: irq 12, io base 0000d000
Dec 27 17:57:28 linux kernel: uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
Dec 27 17:57:28 linux kernel: usb usb2: Product: UHCI Host Controller
Dec 27 17:57:28 linux kernel: usb usb2: Manufacturer: Linux 2.6.8-24-default uhci_hcd
Dec 27 17:57:28 linux kernel: usb usb2: SerialNumber: 0000:00:07.3
Dec 27 17:57:28 linux kernel: hub 2-0:1.0: USB hub found
Dec 27 17:57:28 linux kernel: hub 2-0:1.0: 2 ports detected
Dec 27 17:57:28 linux kernel: usb 1-1: new full speed USB device using address 2
Dec 27 17:57:28 linux kernel: usb 1-1: Product: T-ModemUSB
Dec 27 17:57:28 linux kernel: usb 1-1: Manufacturer: Teltonika
Dec 27 17:57:28 linux kernel: usb 1-1: SerialNumber: FTNJ58SN
Dec 27 17:57:28 linux kernel: usb 1-2: new low speed USB device using address 3
Dec 27 17:57:28 linux kernel: usb 1-2: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
Dec 27 17:57:28 linux kernel: usb 1-2: Manufacturer: Microsoft
Dec 27 17:57:28 linux kernel: usb 2-1: new full speed USB device using address 2
Dec 27 17:57:28 linux kernel: usb 2-1: Product: deskjet 3320
Dec 27 17:57:28 linux kernel: usb 2-1: Manufacturer: hp
Dec 27 17:57:28 linux kernel: usb 2-1: SerialNumber: TH2B6231DW4I
Dec 27 17:57:28 linux kernel: hdc: ATAPI 48X DVD-ROM CD-R/RW drive, 2048kB Cache
Dec 27 17:57:28 linux kernel: Uniform CD-ROM driver Revision: 3.20
Dec 27 17:57:28 linux kernel: SCSI subsystem initialized
Dec 27 17:57:28 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
Dec 27 17:57:28 linux kernel: usbcore: registered new driver usbserial_generic
Dec 27 17:57:28 linux kernel: usbcore: registered new driver usbserial
Dec 27 17:57:28 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
Dec 27 17:57:28 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI SIO
Dec 27 17:57:28 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI 8U232AM Compatible
Dec 27 17:57:28 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI FT232BM Compatible
Dec 27 17:57:28 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI FT2232C Compatible
Dec 27 17:57:28 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for USB-UIRT Infrared Tranceiver
Dec 27 17:57:28 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Home-Electronics TIRA-1 IR Transceiver
Dec 27 17:57:28 linux kernel: ftdi_sio 1-1:1.0: FTDI FT232BM Compatible converter detected
Dec 27 17:57:28 linux kernel: usb 1-1: FTDI FT232BM Compatible converter now attached to ttyUSB0
Dec 27 17:57:28 linux kernel: usbcore: registered new driver ftdi_sio
Dec 27 17:57:28 linux kernel: drivers/usb/serial/ftdi_sio.c: v1.4.1:USB FTDI Serial Converters Driver
Dec 27 17:57:28 linux kernel: usbcore: registered new driver hiddev
Dec 27 17:57:28 linux kernel: st: Version 20040403, fixed bufsize 32768, s/g segs 256
Dec 27 17:57:28 linux kernel: input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:07.2-2
Dec 27 17:57:28 linux kernel: usbcore: registered new driver usbhid
Dec 27 17:57:28 linux kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Dec 27 17:57:28 linux kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7004
Dec 27 17:57:28 linux kernel: usbcore: registered new driver usblp
Dec 27 17:57:28 linux kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Dec 27 17:57:28 linux kernel: evdev_connect: evdev c1238e80 handle c1238e9c name event0
Dec 27 17:57:28 linux kernel: evdev_connect: evdev c1238d80 handle c1238d9c name event1
Dec 27 17:57:28 linux kernel: evdev_connect: evdev c1238c80 handle c1238c9c name event2
Dec 27 17:57:28 linux kernel: eth0: link down
Dec 27 17:57:28 linux kernel: NET: Registered protocol family 17
Dec 27 17:57:28 linux kernel: BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Dec 27 17:57:28 linux kernel: NET: Registered protocol family 10
Dec 27 17:57:28 linux kernel: Disabled Privacy Extensions on device c037f6a0(lo)
Dec 27 17:57:28 linux kernel: IPv6 over IPv4 tunneling driver
Dec 27 17:57:28 linux kernel: PCI: Found IRQ 10 for device 0000:00:07.5
Dec 27 17:57:28 linux kernel: PCI: Setting latency timer of device 0000:00:07.5 to 64
Dec 27 17:57:28 linux kernel: powernow-k8: Processor cpuid 631 not supported
Dec 27 17:57:28 linux kernel: powernow: No powernow capabilities detected
Dec 27 17:57:31 linux kernel: lp0: using parport0 (polling).
Dec 27 17:57:35 linux kernel: Disabled Privacy Extensions on device ce4cd000(sit0)
Dec 27 17:57:35 linux kernel: eth0: no IPv6 routers present
Dec 27 17:57:36 linux kernel: Non-volatile memory driver v1.2
Dec 27 17:57:36 linux kernel: end_request: I/O error, dev fd0, sector 0
Dec 27 17:57:36 linux kernel: end_request: I/O error, dev fd0, sector 0
Dec 27 17:57:36 linux kdm: :0[4077]: pam_unix2: session started for user pawel, service xdm-np
Dec 27 17:57:40 linux ifup: No configuration found for sit0
Dec 27 17:57:40 linux /usr/sbin/cron[4458]: (CRON) STARTUP (V5.0)
Dec 27 17:58:06 linux kernel: ISO 9660 Extensions: Microsoft Joliet Level 3
Dec 27 17:58:06 linux kernel: ISOFS: changing to secondary root
Dec 27 17:59:01 linux /usr/sbin/cron[4551]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Dec 27 18:00:17 linux su: (to root) pawel on /dev/pts/2
Dec 27 18:00:17 linux su: pam_unix2: session started for user root, service su
Dec 27 18:00:17 linux su: pam_unix2: session finished for user root, service su
Dec 27 18:00:17 linux su: (to root) pawel on /dev/pts/2
Dec 27 18:00:17 linux su: pam_unix2: session started for user root, service su
Dec 27 18:00:49 linux su: pam_unix2: session finished for user root, service su
Dec 27 18:01:42 linux su: (to root) pawel on /dev/pts/3
Dec 27 18:01:42 linux su: pam_unix2: session started for user root, service su
Dec 27 18:01:42 linux su: pam_unix2: session finished for user root, service su
Dec 27 18:01:42 linux su: (to root) pawel on /dev/pts/3
Dec 27 18:01:42 linux su: pam_unix2: session started for user root, service su
Dec 27 18:01:54 linux kernel: md: Autodetecting RAID arrays.
Dec 27 18:01:54 linux kernel: md: autorun ...
Dec 27 18:01:54 linux kernel: md: ... autorun DONE.
Dec 27 18:02:16 linux kernel: end_request: I/O error, dev fd0, sector 0
Dec 27 18:02:16 linux kernel: end_request: I/O error, dev fd0, sector 0
Dec 27 18:02:22 linux su: pam_unix2: session finished for user root, service su
Dec 27 18:02:41 linux kdm: :0[4077]: pam_unix2: session finished for user pawel, service xdm-np
Dec 27 18:02:42 linux kernel: apm: set display: No APM present
Dec 27 18:02:42 linux init: Switching to runlevel: 6
Dec 27 18:02:42 linux kernel: bootsplash: status on console 0 changed to on
Dec 27 18:02:42 linux kernel: bootsplash: status on console 0 changed to on
Dec 27 18:02:43 linux sshd[3937]: Received signal 15; terminating.
Dec 27 18:02:44 linux kernel: Kernel logging (proc) stopped.
Dec 27 18:02:44 linux kernel: Kernel log daemon terminating.
Dec 27 18:02:45 linux exiting on signal 15
Dec 29 23:21:56 linux syslogd 1.4.1: restart.
Dec 29 23:21:58 linux sshd[3795]: Server listening on :: port 22.
Dec 29 23:22:00 linux rcpowersaved: CPU frequency scaling is not supported by your processor.
Dec 29 23:22:00 linux rcpowersaved: enter 'POWERSAVE_CPUFREQD_MODULE=off' in /etc/sysconfig/powersave/cpufreq to avoid this warning.
Dec 29 23:22:01 linux kernel: klogd 1.4.1, log source = /proc/kmsg started.
Dec 29 23:22:01 linux kernel: parport0: PC-style at 0x378 [PCSPP,EPP]
Dec 29 23:22:01 linux kernel: parport_pc: Via 686A parallel port: io=0x378
Dec 29 23:22:01 linux kernel: Linux agpgart interface v0.100 (c) Dave Jones
Dec 29 23:22:01 linux kernel: agpgart: Detected VIA KLE133 chipset
Dec 29 23:22:01 linux kernel: agpgart: Maximum main memory to use for agp memory: 196M
Dec 29 23:22:01 linux kernel: agpgart: AGP aperture is 64M @ 0xe0000000
Dec 29 23:22:01 linux kernel: USB Universal Host Controller Interface driver v2.2
Dec 29 23:22:01 linux kernel: PCI: Found IRQ 12 for device 0000:00:07.2
Dec 29 23:22:01 linux kernel: PCI: Sharing IRQ 12 with 0000:00:07.3
Dec 29 23:22:01 linux kernel: PCI: Sharing IRQ 12 with 0000:00:0a.0
Dec 29 23:22:01 linux kernel: uhci_hcd 0000:00:07.2: UHCI Host Controller
Dec 29 23:22:01 linux kernel: uhci_hcd 0000:00:07.2: irq 12, io base 0000cc00
Dec 29 23:22:01 linux kernel: uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
Dec 29 23:22:01 linux kernel: usb usb1: Product: UHCI Host Controller
Dec 29 23:22:01 linux kernel: usb usb1: Manufacturer: Linux 2.6.8-24-default uhci_hcd
Dec 29 23:22:01 linux kernel: usb usb1: SerialNumber: 0000:00:07.2
Dec 29 23:22:01 linux kernel: hub 1-0:1.0: USB hub found
Dec 29 23:22:01 linux kernel: hub 1-0:1.0: 2 ports detected
Dec 29 23:22:01 linux kernel: PCI: Found IRQ 12 for device 0000:00:07.3
Dec 29 23:22:01 linux kernel: PCI: Sharing IRQ 12 with 0000:00:07.2
Dec 29 23:22:01 linux kernel: PCI: Sharing IRQ 12 with 0000:00:0a.0
Dec 29 23:22:01 linux kernel: uhci_hcd 0000:00:07.3: UHCI Host Controller
Dec 29 23:22:01 linux kernel: uhci_hcd 0000:00:07.3: irq 12, io base 0000d000
Dec 29 23:22:01 linux kernel: uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
Dec 29 23:22:01 linux kernel: usb usb2: Product: UHCI Host Controller
Dec 29 23:22:01 linux kernel: usb usb2: Manufacturer: Linux 2.6.8-24-default uhci_hcd
Dec 29 23:22:01 linux kernel: usb usb2: SerialNumber: 0000:00:07.3
Dec 29 23:22:01 linux kernel: hub 2-0:1.0: USB hub found
Dec 29 23:22:01 linux kernel: hub 2-0:1.0: 2 ports detected
Dec 29 23:22:01 linux kernel: usb 1-2: new low speed USB device using address 2
Dec 29 23:22:01 linux kernel: usb 1-2: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
Dec 29 23:22:01 linux kernel: usb 1-2: Manufacturer: Microsoft
Dec 29 23:22:01 linux kernel: usb 2-1: new full speed USB device using address 2
Dec 29 23:22:01 linux kernel: usb 2-1: Product: deskjet 3320
Dec 29 23:22:01 linux kernel: usb 2-1: Manufacturer: hp
Dec 29 23:22:01 linux kernel: usb 2-1: SerialNumber: TH2B6231DW4I
Dec 29 23:22:01 linux kernel: hdc: ATAPI 48X DVD-ROM CD-R/RW drive, 2048kB Cache
Dec 29 23:22:01 linux kernel: Uniform CD-ROM driver Revision: 3.20
Dec 29 23:22:01 linux kernel: SCSI subsystem initialized
Dec 29 23:22:01 linux kernel: usbcore: registered new driver hiddev
Dec 29 23:22:01 linux kernel: input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:07.2-2
Dec 29 23:22:01 linux kernel: usbcore: registered new driver usbhid
Dec 29 23:22:01 linux kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Dec 29 23:22:01 linux kernel: st: Version 20040403, fixed bufsize 32768, s/g segs 256
Dec 29 23:22:01 linux kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7004
Dec 29 23:22:01 linux kernel: usbcore: registered new driver usblp
Dec 29 23:22:01 linux kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Dec 29 23:22:01 linux kernel: evdev_connect: evdev c1238c80 handle c1238c9c name event0
Dec 29 23:22:01 linux kernel: evdev_connect: evdev c1238b80 handle c1238b9c name event1
Dec 29 23:22:01 linux kernel: evdev_connect: evdev c1238a80 handle c1238a9c name event2
Dec 29 23:22:01 linux kernel: eth0: link down
Dec 29 23:22:01 linux kernel: NET: Registered protocol family 17
Dec 29 23:22:01 linux kernel: BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Dec 29 23:22:01 linux kernel: NET: Registered protocol family 10
Dec 29 23:22:01 linux kernel: Disabled Privacy Extensions on device c037f6a0(lo)
Dec 29 23:22:01 linux kernel: IPv6 over IPv4 tunneling driver
Dec 29 23:22:01 linux kernel: PCI: Found IRQ 10 for device 0000:00:07.5
Dec 29 23:22:01 linux kernel: PCI: Setting latency timer of device 0000:00:07.5 to 64
Dec 29 23:22:01 linux kernel: powernow-k8: Processor cpuid 631 not supported
Dec 29 23:22:01 linux kernel: powernow: No powernow capabilities detected
Dec 29 23:22:03 linux kernel: lp0: using parport0 (polling).
Dec 29 23:22:03 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
Dec 29 23:22:03 linux kernel: usbcore: registered new driver usbserial_generic
Dec 29 23:22:03 linux kernel: usbcore: registered new driver usbserial
Dec 29 23:22:03 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
Dec 29 23:22:08 linux kernel: eth0: no IPv6 routers present
Dec 29 23:22:08 linux kernel: Disabled Privacy Extensions on device cd5d1c00(sit0)
Dec 29 23:22:09 linux kernel: Non-volatile memory driver v1.2
Dec 29 23:22:09 linux kernel: end_request: I/O error, dev fd0, sector 0
Dec 29 23:22:09 linux kernel: end_request: I/O error, dev fd0, sector 0
Dec 29 23:22:10 linux kdm: :0[3956]: pam_unix2: session started for user pawel, service xdm-np
Dec 29 23:22:13 linux /usr/sbin/cron[4289]: (CRON) STARTUP (V5.0)
Dec 29 23:22:13 linux ifup: No configuration found for sit0
Dec 29 23:22:39 linux kernel: ISO 9660 Extensions: Microsoft Joliet Level 1
Dec 29 23:22:39 linux kernel: ISOFS: changing to secondary root
Dec 29 23:23:07 linux kernel: usb 1-1: new full speed USB device using address 3
Dec 29 23:23:07 linux kernel: usb 1-1: Product: T-ModemUSB
Dec 29 23:23:07 linux kernel: usb 1-1: Manufacturer: Teltonika
Dec 29 23:23:07 linux kernel: usb 1-1: SerialNumber: FTNJ58SN
Dec 29 23:23:14 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI SIO
Dec 29 23:23:14 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI 8U232AM Compatible
Dec 29 23:23:14 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI FT232BM Compatible
Dec 29 23:23:14 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI FT2232C Compatible
Dec 29 23:23:14 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for USB-UIRT Infrared Tranceiver
Dec 29 23:23:14 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Home-Electronics TIRA-1 IR Transceiver
Dec 29 23:23:14 linux kernel: ftdi_sio 1-1:1.0: FTDI FT232BM Compatible converter detected
Dec 29 23:23:14 linux kernel: usb 1-1: FTDI FT232BM Compatible converter now attached to ttyUSB0
Dec 29 23:23:14 linux kernel: usbcore: registered new driver ftdi_sio
Dec 29 23:23:14 linux kernel: drivers/usb/serial/ftdi_sio.c: v1.4.1:USB FTDI Serial Converters Driver
Dec 29 23:23:24 linux /etc/dev.d/tty/50-visor.dev[4610]: add tty device /class/tty/ttyUSB0
Dec 29 23:23:36 linux su: FAILED SU (to root) pawel on /dev/pts/2
Dec 29 23:23:49 linux su: (to root) pawel on /dev/pts/2
Dec 29 23:23:49 linux su: pam_unix2: session started for user root, service su
Dec 29 23:23:49 linux su: pam_unix2: session finished for user root, service su
Dec 29 23:23:49 linux su: (to root) pawel on /dev/pts/2
Dec 29 23:23:49 linux su: pam_unix2: session started for user root, service su
Dec 29 23:23:59 linux su: pam_unix2: session finished for user root, service su
Dec 29 23:25:24 linux gconfd (pawel-4697): starting (version 2.6.1), pid 4697 user 'pawel'
Dec 29 23:25:24 linux gconfd (pawel-4697): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory" to a read-only config source at position 0
Dec 29 23:25:24 linux gconfd (pawel-4697): Resolved address "xml:readwrite:/home/pawel/.gconf" to a writable config source at position 1
Dec 29 23:25:24 linux gconfd (pawel-4697): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults" to a read-only config source at position 2
Dec 29 23:25:54 linux gconfd (pawel-4697): GConf server is not in use, shutting down.
Dec 29 23:25:54 linux gconfd (pawel-4697): Exiting
Dec 29 23:26:14 linux kernel: usb 1-1: USB disconnect, address 3
Dec 29 23:26:14 linux kernel: FTDI FT232BM Compatible ttyUSB0: FTDI FT232BM Compatible converter now disconnected from ttyUSB0
Dec 29 23:26:14 linux kernel: ftdi_sio 1-1:1.0: device disconnected
Dec 29 23:26:15 linux /sbin/hotplug[4725]: unknown command
Dec 29 23:26:15 linux /sbin/hotplug[4726]: unknown command
Dec 29 23:26:19 linux kernel: drivers/usb/input/hid-core.c: input irq status -84 received
Dec 29 23:26:19 linux kernel: usb 1-2: USB disconnect, address 2
Dec 29 23:26:20 linux /sbin/hotplug[4787]: unknown command
Dec 29 23:26:20 linux /sbin/hotplug[4786]: unknown command
Dec 29 23:26:26 linux kernel: usb 1-2: new full speed USB device using address 4
Dec 29 23:26:26 linux kernel: usb 1-2: Product: T-ModemUSB
Dec 29 23:26:26 linux kernel: usb 1-2: Manufacturer: Teltonika
Dec 29 23:26:26 linux kernel: usb 1-2: SerialNumber: FTNJ58SN
Dec 29 23:26:26 linux kernel: ftdi_sio 1-2:1.0: FTDI FT232BM Compatible converter detected
Dec 29 23:26:26 linux kernel: usb 1-2: FTDI FT232BM Compatible converter now attached to ttyUSB0
Dec 29 23:26:36 linux /etc/dev.d/tty/50-visor.dev[5003]: add tty device /class/tty/ttyUSB0
Dec 29 23:27:36 linux kernel: usb 1-1: new low speed USB device using address 5
Dec 29 23:27:36 linux kernel: usb 1-1: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
Dec 29 23:27:36 linux kernel: usb 1-1: Manufacturer: Microsoft
Dec 29 23:27:36 linux kernel: evdev_connect: evdev cf777a60 handle cf777a7c name event2
Dec 29 23:27:36 linux kernel: input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:07.2-1
Dec 29 23:28:06 linux kdm: :0[3956]: pam_unix2: session finished for user pawel, service xdm-np
Dec 29 23:28:06 linux kernel: apm: set display: No APM present
Dec 29 23:28:24 linux kdm: :0[5283]: pam_unix2: session started for user root, service xdm

[Guest]

Nesu specialistas, bet bandyčiau jungtis kaip prie paprasto modemo per /dev/tty/ttyUSB0

[Guest]

Gerai butu kad kas nors parašytu kaip tai daryti.

[Linuxbattalion]

Pats turiu toki modema, T-ModemUSB (TMU-105), iš karto turejau labai daug problemu su juo, bet prijungimas prie Linux sistemos yra labai lengvas, tik Omnitel galetu ant CD, kartu su windows XP draiveriais (tvarkikliais), parašyti instrukcija kaip prijungineti prie Linuxo, bet tai rodo kad Omnitel yra nesolidi firma. Taigi, aš prijungiau taip:

1.Kiek žinau, tai tik Linux kernel (sistemos branduolis) 2.6.9, ir naujasnis palaiko T-ModemUSB, jaigu jusu sistema turi senesni branduoli, tai neko ne išeis.
2. Kad naudoti T-ModemUSB Linux sistemoje, reikia išjunkti PIN koda, kitaip neko nebus, Linux neturi priemoniu kad ivesti PIN koda.
3.PIN koda galima atjunkti tik Windows XP sistemoje, deja..... Aš tai padariau pas kaimyna kuris savo kompe turejo Windows XP.
4.Windows XP sistemoje turi buti užinstaliuota programele iš CD, gauto kartu su modemu.
5.Atjungimas: Paleisti T-ModemUSB valdymo programa, spausti Search for  T-Modem, spausti Modem, spausti PIN query, spausti PIN code disabled, spausti OK, kodo skaičius palikti langelyje, netrinti (na tu žvaigždučiu), spausti OK,  ir tada darom kompo restarta. Viskas, kodas atjungtas.
6.Dabar galima dirbti su Linux. Kad greičiau butu, rašysiu schematiškai:
 Darbo aplinka KDE (aš tokia naudoju) > Start > Internet > KPPP > Configure > Acounts > New > Manual Steps > irašyti: Omni Connect Namams > Add (Prideti) > irašyti: *99***1#   > OK > Modems > New > Modem Name > irašyti: T-ModemUSB > modem device > išrinkti: /dev/ttyUSB0 > connection speed > išrinkti: 230400 > OK > Login ID (arba User Name) irašyti: omni > password > irašyti: omni > spausti Connect (Prijungimas)
7.Viskas turi veikti kuo puikiausiai!!! Šiuos veiksmus reikia daryti tik viena karta, kitus kartus tik paleisti programele KPPP, ir spausti Connect (Prijungimas), arba Disconnect (Atjungimas).
8.Norečiau pamatyti atsakimus, ar pavyko.
9.Sekmes. Linux Rules!!!!!!!!!!!!

[NeoCristal]

1. PIN koda galima nuimti ir per telefoną, tiesiog idėk į teletoną ir suvesk PIN kodą poto nueinį į Security and Settings arba Apsauga, arba į tą vietą kur galima nuimti PIN kodą ir viskas jis yra nuimtas.
2. skambinti *99***1#, šitas yra irgi nebūtinas toks ilgumas, galima ir paprastai *99#

[Linuxbattalion]

1.Per telefona bandžiau, neko neišiejo.
2.Kad galima naudoti *99# tai žinojau, tiesiog šitame portale buvo patarymas naudoti *99***1#, tai ir aš taip parašiau, to labiau kad irgi veikia, ir ne tiek jau jis ten ir ilgas, vistiek, kiek viena karta nereikia ivedineti. Man ar 4 ženklai, ar 8 skirtumas labai mažas.

[adomasas]

labai dekui parashiusiam kaip omniu jobana prijungt..
jei ne shi zhinute tai turbut taip ir liktu mana ubuntas nevartojamas nes be interneto